Service category · Wireline / logging
Perforating
Perforating creates holes through casing and cement to connect the wellbore to the reservoir, using shaped charges carried on wireline or on tubing.
A perforating crew assembles gun strings, runs them to depth, positions them using correlation data and fires them. In plug-and-perf completions the same crew sets plugs between stages. You receive depth-correlated records of each run and confirmation of what fired.
Where it sits in the life of a well
Ordered by the completions engineer for each stage or zone, usually coordinated with the frac crew and wireline provider so guns, plugs and treatment sequence are all ready.
- 01Build the siteSurvey the lease, build the access road and pad, and bring in the camp, rentals and utilities the job will need.
- 02DrillMove the rig in, drill and case the well, and manage fluids, solids and directional control along the way.
- 03Complete and stimulateCement, perforate, fracture and clean out the well, then flow it back and test it. (main stage for this service)
- 04Produce and interveneLift, treat and haul production, and bring service rigs, coil and wireline back when the well needs work.
- 05Facilities and pipelineBuild and maintain the batteries, compressor stations, plants and pipelines that move and process what the wells produce.
- 06Abandon and reclaimAbandon the well and pipelines, remove the equipment, assess the site and return the land to its former use.
What to specify
Write these down before you ask for a price, so every provider quotes the same job.
- Casing size and grade, and intervals to be perforated
- Gun type, charge and shot density from the design
- Wireline or tubing-conveyed method and number of runs
- Plug type and setting depth for plug-and-perf programs
- Correlation logs and depth reference to be used
- Number of stages and wells, and schedule alongside the frac fleet
- Pressure control at surface and lubricator arrangement
- Explosives storage, handling and site security arrangements
What to ask the provider
- How do you handle a misfire or a gun that fails to detonate fully?
- What is your crew's capacity for continuous multi-stage work?
- Who supplies plugs and who is responsible if one fails to set?
- How do you confirm depth correlation before firing?
- What records do you provide for each run?
- How do you manage explosives on location and in transit?
Where quotes usually differ
Check each quote for these before you compare totals.
- Whether guns, charges and plugs are included or billed per stage
- Treatment of a misrun or failed plug
- Minimum stage count and overnight standby rules
- Whether pressure control equipment and crane are included
Perforating companies
5 companies in the directory are listed under perforating, in alphabetical order. 1 has it as the primary service; the rest list it alongside another main line.
| Company | Primary service | Head office | Offices and yards | Named service areas | Sources checked |
|---|---|---|---|---|---|
| Big Guns Energy Services (BGES) | Wireline / logging | Calgary, Alberta | Calgary, Red Deer, Bonnyville | None named | |
| Command Fishing and Pipe Recovery | Fishing and downhole tools | Edmonton, Alberta | Edmonton, Bonnyville, Grande Prairie, Estevan +1 | None named | |
| Magnum Perforating Services Inc. | Perforating | Drayton Valley, Alberta | Drayton Valley | None named | |
| Reliance Oilfield Services | Wireline / logging | Calgary, Alberta | Calgary, Bonnyville, Grande Prairie, Red Deer +5 | Western Canada | |
| Tier 1 Energy Solutions | Wireline / logging | Not published | Not published | None named |
Office towns for this service
Quick answers
What is perforating?
Perforating creates holes through casing and cement to connect the wellbore to the reservoir, using shaped charges carried on wireline or on tubing.
What does a perforating provider do on the job?
A perforating crew assembles gun strings, runs them to depth, positions them using correlation data and fires them. In plug-and-perf completions the same crew sets plugs between stages. You receive depth-correlated records of each run and confirmation of what fired.
When is perforating ordered?
Ordered by the completions engineer for each stage or zone, usually coordinated with the frac crew and wireline provider so guns, plugs and treatment sequence are all ready.
What should I have ready before asking for a perforating price?
Have these ready: casing size and grade, and intervals to be perforated; gun type, charge and shot density from the design; wireline or tubing-conveyed method and number of runs; plug type and setting depth for plug-and-perf programs; correlation logs and depth reference to be used.
How is perforating usually quoted?
Common structures: per-stage price; per-run or per-job price; day rate for crew and unit; guns, plugs, redress, misfire handling and standby sit outside the base rate. Rates vary by job and season, so get them in writing.
Where do perforating quotes usually differ?
Check each quote for: whether guns, charges and plugs are included or billed per stage; treatment of a misrun or failed plug; minimum stage count and overnight standby rules; whether pressure control equipment and crane are included.
Often needed on the same job
- Coil tubing19 companies
- Completions40 companies
- Fracturing / stimulation10 companies
- Wireline / logging29 companies
How the equipment works
Equipment lessons are published by AlbertaOil.ca, a separate site.
- Browse the full equipment atlasAlbertaOil.ca