Canada 13 provinces and territoriesSources checked to ยท No paid placement

Service category

Solids control

Solids control services clean drilling fluid and handle cuttings on location, using shakers, centrifuges and dryers to keep the mud in spec and reduce waste.

A solids control crew sets up and runs equipment that separates cuttings from the fluid, returns clean mud to the system and prepares waste for disposal. You receive operators, equipment and basic reporting. Good handling reduces fluid cost and waste volume.

Where it sits in the life of a well

Engaged by the drilling engineer or fluids coordinator before spud, since equipment must be on the lease and rigged in ahead of the first drilling run.

  1. 01Build the siteSurvey the lease, build the access road and pad, and bring in the camp, rentals and utilities the job will need.
  2. 02DrillMove the rig in, drill and case the well, and manage fluids, solids and directional control along the way. (main stage for this service)
  3. 03Complete and stimulateCement, perforate, fracture and clean out the well, then flow it back and test it.
  4. 04Produce and interveneLift, treat and haul production, and bring service rigs, coil and wireline back when the well needs work.
  5. 05Facilities and pipelineBuild and maintain the batteries, compressor stations, plants and pipelines that move and process what the wells produce.
  6. 06Abandon and reclaimAbandon the well and pipelines, remove the equipment, assess the site and return the land to its former use.

What to specify

Write these down before you ask for a price, so every provider quotes the same job.

  • Hole sizes and drilling fluid type, such as water-based or invert
  • Expected cuttings volume and rate from the program
  • Equipment needed, such as shakers, centrifuges, dryers or mud cleaners
  • Operator coverage, crew hours and shift rotation required
  • Space and power available on the lease
  • Cuttings storage, bins and transport to disposal
  • Fluid recovery and recycling goals for the program
  • Reporting such as retort or solids analysis and waste tallies

What to ask the provider

  • What equipment package do you propose for this fluid and hole size?
  • How do you size equipment to the cuttings rate?
  • Who supplies power, water and fuel for your units?
  • How is waste handled and what disposal routes do you support?
  • What recovery of fluid do you typically report and how is it measured?
  • What is the crew's experience with my fluid type?

Where quotes usually differ

Check each quote for these before you compare totals.

  • Whether operators and fuel are included
  • Whether waste bins and hauling are in the quote
  • Replacement screens and consumables
  • Treatment of standby between wells and idle equipment

Solids control companies

5 companies in the directory are listed under solids control, in alphabetical order. 3 have it as the primary service; the rest list it alongside another main line.

Companies listed under Solids control
CompanyPrimary serviceHead officeOffices and yardsNamed service areasSources checked
Apex Oilfield Services (2000) Inc. Rentals Red Deer County, Alberta Red Deer County None named
Campbell Energy & Environmental Services Solids control Calgary, Alberta Calgary None named
Strategic Partner Energy Services Specialist and supporting services Calgary, Alberta Calgary None named
Taber Solids Control Ltd. Solids control Edmonton, Alberta Edmonton None named
Whirlybyrds Inc. Solids control Calgary, Alberta Calgary None named

Office towns for this service

Quick answers

What is solids control?

Solids control services clean drilling fluid and handle cuttings on location, using shakers, centrifuges and dryers to keep the mud in spec and reduce waste.

What does a solids control provider do on the job?

A solids control crew sets up and runs equipment that separates cuttings from the fluid, returns clean mud to the system and prepares waste for disposal. You receive operators, equipment and basic reporting. Good handling reduces fluid cost and waste volume.

When is solids control ordered?

Engaged by the drilling engineer or fluids coordinator before spud, since equipment must be on the lease and rigged in ahead of the first drilling run.

What should I have ready before asking for a solids control price?

Have these ready: hole sizes and drilling fluid type, such as water-based or invert; expected cuttings volume and rate from the program; equipment needed, such as shakers, centrifuges, dryers or mud cleaners; operator coverage, crew hours and shift rotation required; space and power available on the lease.

How is solids control usually quoted?

Common structures: day rate per equipment package; per-unit rate for each machine; operator day rate; waste hauling, consumables, standby and recovered fluid credit sit outside the base rate. Rates vary by job and season, so get them in writing.

Where do solids control quotes usually differ?

Check each quote for: whether operators and fuel are included; whether waste bins and hauling are in the quote; replacement screens and consumables; treatment of standby between wells and idle equipment.

Compare companies