Name the fluid and how it is classified
Start with what you are moving. Crude oil, condensate, produced water, fresh water, drilling fluid, flowback and wash water are handled differently, and the type can change the equipment, the paperwork and the destination. Give the provider the fluid description you hold, any lab or classification result, and whether it contains solids, sour gas or hydrocarbon.
Ask what the provider needs to see before accepting the load. Confirm the documents that apply to your fluid with the regulator and your own safety team, and ask the provider to confirm what it requires. A provider that asks few questions about the fluid may be pricing a simpler job than the one you have, so treat detailed questions as a good sign.
If the fluid changes during the job, as flowback often does, say so. Early loads may be mostly water and later loads may carry oil or solids, which can change the truck, the destination and the price. Ask how the provider wants to be told, and who decides when a load is reclassified.
Loading and unloading points
Describe each pickup and drop-off. Lease access, turnaround space, loading connections, tank type and whether anyone is on site to start the load all affect truck time. If a tank sits beside a narrow lease road, tell the provider. A unit that cannot reach the connection will be sent back, and the trip is usually billed.
- Pickup location, tank or vessel type and the connection the truck will use.
- Whether the site is staffed or the driver loads alone.
- Winter access, wet-season access and any gate or key arrangement.
- Drop-off point and the rules the receiving site applies to trucks.
Destination, disposal or delivery
Fluid either goes to a disposal or treatment facility, or is delivered to another customer or operation. Decide who selects the destination and who holds the account. If the provider chooses, ask whether the choice changes the route, the time or the price. If you choose, tell the provider before it quotes.
Ask who pays any facility charge and how it appears on the invoice, and whether it is passed through at cost or marked up. Say whether you want to approve the facility before the first load. Confirm the receiving facility's current acceptance requirements with the facility and the regulator.
Distance and queueing at the destination change the real cost. A nearer facility with a long queue can take more truck time than a farther one that unloads quickly. Ask the provider how it plans for facility hours, closures and line-ups, and what it does when the chosen facility cannot take the load.
Ticketing, measurement and wait time
Quotes for fluid hauling rest on how loads are measured and how time is counted. Some are priced by load, some by hour, some by volume delivered and some by a mix. Ask which basis applies, how volume is established, and who signs the ticket at each end, because that ticket supports the invoice and any later dispute.
Wait time deserves its own line. Trucks wait for tanks to fill, for sites to open and at receiving facilities. Ask when waiting starts, what free time applies and what rate follows. Also ask who records arrival and departure times, since both sides will rely on those records if the invoice is questioned.
Ask how tickets reach you. Paper tickets, electronic tickets and daily summaries each work, but the invoice should tie back to a ticket for every load. Agree how disputed volumes or times are raised, and how long you have to raise them, before the first truck rolls.
| Billing basis | Works well when | Check |
|---|---|---|
| Per load | Loads are similar and the route is steady | What counts as a full load and how partial loads are billed |
| Per hour | Wait time, loading time or distance varies | When the clock starts and stops, and travel time |
| Per unit of volume | Measured quantity matters to the customer | Who measures, with what meter or tank gauge, and who signs |
| Mixed, with minimums | Short trips mean the truck would otherwise run at a loss | The minimum, and whether it applies per trip or per day |
| Standby or on-call | A truck must be held for your use | Hold period, rate and cancellation terms |
Equipment type and driver competency
Ask what unit will run the job. Vacuum trucks, tankers, pressure trucks and trailers suit different fluids and sites, so say what you need and ask the provider to match it. Check whether the unit can load on its own pump, handle heavy fluid or run in winter conditions, and whether the provider has spare units if one is out.
Ask how drivers are trained, supervised and tracked for your site. Request the safety program documents, insurance and prequalification information your own process requires. Ask who is accountable if the driver finds a condition on site that stops the job.
Ask what the driver does if the tank holds something different from what the ticket says, or if conditions on the lease are unsafe. A clear answer, with a named contact on both sides, shows the provider has planned for problems and is not relying on the driver to improvise.
Compare answers and confirm before award
Put the answers in one table: fluid, route, destination, billing basis, wait terms, equipment and driver details. A quote that leaves one of these blank has not priced it. Ask for the missing item in writing, then compare total cost for your actual haul pattern instead of the lowest per-load figure.
- Same fluid description, locations and destination in every quote.
- Same billing basis, with free time and wait rates stated.
- Facility charges either on the quote or confirmed as billed to you.
- Equipment, driver and insurance details provided before award.
How quotes end up not comparable
- Describing the fluid loosely and discovering later that it needs a different truck or destination.
- Not stating who pays for the receiving facility, so each quote treats it differently.
- Leaving wait time out, then paying for trucks that sit at slow sites.
- Comparing a per-load price with an hourly price without testing both against your real haul pattern.
- Accepting tickets that do not show volume, time or the signature of someone on site.
This guide is general buying guidance for a conversation with a provider. It is not engineering, legal or safety advice. Confirm current regulatory requirements with the regulator for your province.