Canada 13 provinces and territoriesSources checked to ยท No paid placement

Buyer guide

How to scope and compare hydrovac quotes

Define the excavation type, ground and site access first, then ask each supplier to price spoil handling, disposal, water, standby, mobilization and travel on separate lines. Quotes only compare once those lines and the ground assumptions match. The lowest hourly rate rarely gives the lowest total.

Define the job before you ask for a price

Start with the purpose of the excavation. Daylighting means exposing a buried line to confirm where it is. Slot trenching means cutting a narrow, deeper opening, often along a route or beside a structure. Suppliers build quotes for each differently, so say which one you need, how many locations there are and whether the work is one visit or a program spread over weeks.

Say what happens once the hole is open. A crew that waits for a locator, a utility owner's representative or an inspector to see the line is on standby, and that time is billed. If another contractor will repair or tie in, tell the supplier where its work starts and ends, so the quote covers your scope and nothing beyond it.

  • Which utility owners are involved, whether lines have been located, and who holds the ground disturbance approvals.
  • The surface at each location, such as lease gravel, muskeg, pavement, cultivated field or snow cover.
  • Whether backfill, compaction and surface restoration are in the scope or handled by another contractor.
  • Whether the crew works around live facilities, which usually brings tighter procedures and slower progress.
  • Access limits such as gates, narrow lease roads, overhead lines and seasonal restrictions.

What changes the price of a hydrovac job

Price follows time on location, unit configuration and what leaves the site. Two quotes can show the same hourly figure and still land far apart once spoil, water and standby are added. Ask each supplier what the base charge includes, then compare the extras line by line instead of comparing the headline rate.

Ground conditions drive productivity more than most buyers expect. Dense clay, cobble, gravel and frozen ground all slow the work, and a supplier with no soil information may price in a contingency. Share bore logs, earlier excavation notes and utility drawings so the crew prices the ground you actually have.

  • Unit size and reach, so you know whether it suits the depth and width of the opening you need.
  • Crew makeup, including whether a spotter or second operator is included.
  • Whether the rate covers fuel, water heating and consumables.
  • Whether the quote assumes day work only or allows extended shifts.
  • Any seasonal change to the rate, including thaw-period access.

How hydrovac quotes are built

Hydrovac work is usually billed by the hour or day, with a minimum, and then separate lines for travel, water and disposal. Ask every supplier to quote in the same structure so each line can be matched. A single all-in figure hides the lines that move most between suppliers.

Common hydrovac quote lines and what to confirm on each
Quote lineWhat to confirm
Hourly or daily unit rateUnit size, operators included, and whether the clock starts at the yard or at the gate
Minimum chargeThe minimum billable period and whether it applies per move or per day
Mobilization and travelStarting yard, whether travel is billed one way or both, and any camp or accommodation cost
StandbyWhat triggers it, the rate that applies and who signs the ticket
WaterWho supplies it, where it is loaded and whether haul time is billed
Spoil handling and disposalHauling, dump site, tipping charges and any testing the facility requires

Spoil, disposal and water supply

Spoil is the soil and slurry the truck removes from the hole. Decide who is responsible for it before you request quotes. Ask who supplies the dump site, who pays the tipping charge, who hauls the load when the tank is full, and whether hydrocarbon-affected soil changes the answer. Confirm the receiving facility's current acceptance rules with the facility and the regulator.

Water is the other large variable. Freshwater source, permission to draw it and the haul to the location all affect time. If you can supply water near the site, say so. If the supplier must find it, ask whether that time is billed. In winter, ask how the unit keeps water and lines from freezing.

  • Which facility will accept the material and who holds the account with it.
  • Who arranges any waste classification or testing the facility needs.
  • How a full tank in the middle of a hole is handled, including the round trip.
  • Whether disposal tickets and manifests come back with the invoice.

Frozen ground, standby and travel

Frozen ground can slow the work, and some jobs need heated water or repeat passes. Ask whether the quote assumes thawed ground and how frost will be handled and billed if the crew finds it. Wet ground in thaw can also stop a unit from reaching a remote lease, so ask how weather delays are treated.

Standby is paid time while the crew waits for something outside its control, such as a locate, a site orientation, a line owner or a delayed tow. Agree the trigger, rate and approval in writing. Travel needs the same clarity: the starting point, whether it is billed both directions and whether accommodation is added on distant sites.

Compare quotes like for like and confirm before award

Put the quotes in one sheet with the same lines and note every assumption beside each supplier. Where a line is blank, ask rather than assume. Check crew competency, unit availability on your dates, insurance and safety program documents against your own prequalification. Then compare the likely total for your real scope, not the lowest hourly figure.

Before award, ask each supplier to restate its assumptions in the quote or the covering email. A short list of conditions, such as ground type, water source, disposal arrangement and standby trigger, protects both sides if the job turns out differently. Agree how changes will be priced and who approves them on site.

  • Same job description, locations and days of work in every quote.
  • Same billing basis, with minimums stated.
  • Travel, standby and disposal on separate lines.
  • Ground and water assumptions written down and agreed.

How quotes end up not comparable

  • Comparing hourly rates while one quote includes water and disposal and another leaves them out.
  • Leaving ground conditions unstated, so each supplier prices a different level of risk.
  • Assuming standby is covered when the quote says nothing about it.
  • Forgetting that the crew may have to wait for a full tank to be hauled and returned.
  • Awarding on price before confirming who holds the disposal arrangement.

This guide is general buying guidance for a conversation with a provider. It is not engineering, legal or safety advice. Confirm current regulatory requirements with the regulator for your province.

Compare companies